The Datalogic QuickScan I Mobile QM2400 is a low cost wireless imager 1D and 2D barcode scanner aimed at general purpose applications.
The scanner can be removed from the base station/charger cradle and used wirelessly at distances of up to 25m (82').
The QM2400 imager features a new illumination and aiming system developed with the unique intent to reduce visual stress of the operator during the daily scanning activities. It consists of a soft, dark red illumination combined with two blue LED triangles pointing at the targeted bar code.
The wireless QM2400 is part of a new family which includes the QBT2400 Bluetooth scanners and the QD2400 corded scanners.
Four QM2400 models are available. These are the:
QM2430-BK-433K1 - black wireless barcode scanner with a base station/charger cradle and a USB cable
QM2430-BK-433K2 - black wireless barcode scanner with a base station/charger cradle and a RS232 cable
QM2430-BK-433 - black wireless barcode scanner with a base station/charger cradle.
QM2430-WH-433 - white wireless barcode scanner with a base station/charger cradle.
The scanner can read most:
standard 1D barcodes including GS1 Databar.
important 2D codes including Aztec, Data Matrix, Maxi Code, QR Code, and Han Xin Code.
postal codes
standard stacked codes including composites, GS1 codes and PDF417
In addition to printed barcodes the scanner can read barcodes from mobile phone screens.
Dimensions and Weight
The dimensions of the hand-held scanner are 163 x 91x 41mm (6.4 x 3.6 x 1.6") and the weight is 0.2kg (0.44 lb)
The weight of the base station/charger cradle is 0.23Kg (0.50lbs).
Drop Resistance and Protection
The scanner can withstand repeated drops from 1.5m (5') to concrete.
The QM2400 scanner is rated at IP42, which means that it is protected against the ingression of small objects (>1mm) and sprays of water 15 degrees from vertical.
Cables and Interfaces
The QM2400 is multi-interface and a range of USB, RS232 and Keyboard Wedge cables is available.
Power Requirements
The QM2400 base station/charger cradle requires an input voltage of 4.5 to 14VDC to operate the wireless link to the hand-held scanner and to charge the scanner when it is placed in the base station/charger cradle.
This power can be supplied from the connected equipment but the time to fully recharge is quite extended.
Unless the scanner is out of the cradle for a significant proportion of the time a USB cable connection should be sufficient to maintain the charge.
Whatever the type of cable connection it is probably better to connect a power supply directly to the base station/charger cradle since this gives much shorter charge times.
A full charge should give up to 30,000 reads.
Resolution and Reading Ranges
The QM2400 can read 1D barcodes with barwidths as small as 4mil. The typical depth of field is:
Code39 (5mil) 5 to 150mm (0.2 to 5.5")
EAN (13mil) 5 to 350mm (.2 to 13.8")
PDF417 (6.6mil) 10 to 130mm (0.4 to 5.1")
Data Matrix (10mil) 10 to 130mm (0.4 to 5.1")
Working Wireless Range
The working wireless range is up to 25m (82') in open air. The actual range may be reduced by environmental factors.
Barcodes Scanner 
(84-028) 38 684 410
sales@wincor.com.vn
Cart 
