Receipt Printer Star WiFi Power Pack

Code: WiFi Power Pack

Mã Vạch 2D

The WiFi Power Pack is designed to make any Star LAN interface printer "wireless" in a cost effective way without a lot of messy cables.

Price: Call

The WiFi Power Pack is designed to make any Star LAN interface printer "wireless" in a cost effective way without a lot of messy cables. This, in turn, enables the Star printer using the WiFi Power Pack to connect with tablets, smart phones and other portable electronic wireless devices.

WiFi Power Pack Specifications
DK-USB Power Module	Designed for DC input 24V with 1A fuse and DC output with rated voltage of 5.0V and rated current of 500mA. Texture surface. USB is short-circuit.
Wireless Standards	IEEE 802. 11n, IEEE 802. 11g, IEEE 802. 11b
Dimensions (WxDxH)	2.2 x 2.2 x0.7 in. (57 x 57 x 18mm)
Antenna Type	On-Board
Frequency	2.4- 2.4835GHz
Single Rate	11n: Up to 150Mbps (dynamic) 11g: Up to 54Mbps (dynamic) 11b: Up to 11Mbps (dynamic)
EIRP	<20dBm (EIRP)
Reception Sensitivity	135M: -70dBm@10%PER 65M: -73dBm@10%PER 54M: -76dBm@10%PER
Wireless Modes	AP Mode, Router Mode, Client Mode. Repeater Mode, Bridge Mode
Wireless Functions	Enable/ Disable Wireless Radio, WDS Bridge, WMM, Wireless Statistics
Wireless Security	64/128/152-bit WEP, WPA/ WPA2 WPA-PSK/ WPA2-PSK
WAN Type	Dynamic IP/ Static IP/ PPPoE/ PPTP/ L2TP
DHCP	Server. Client, DHCP Client
Quality of Service	WMM, Bandwidth Control
Dynamic DNS	DynaDna, Comexe, NO-IP
Auto Power Down Mode	1-5 Minutes Configurable
VNP Pass-Through	PPTP, L2TP, IPSec (ESP Head)
Access Control	Local Management Control, Host List, Access Schedule, Rule management
Firewall Security	DoS, SPI Firewall IP Address Filter/ MAC Address Filter/ Domain Filter IP and MAC Address Binding
Management	Access Control Local Management Remote Manegment