077 383 3868
Tiếng Việt
Homepage Barcodes Scanner Handheld Barcode Scanner Denso Barcode Scanner Denso GT10Q Series

Barcode Scanner Denso GT10Q Series

Code: GT10Q Series
Provider: Denso
Superior Reading Speed of 2D Codes and Bar Codes (Twice Conventional Model(1) Speeds)
Price: Call
Outstanding Readability
  • Superior Reading Speed of 2D Codes and Bar Codes (Twice Conventional Model(1) Speeds)
  • Easily Reads Inferior 2D Code Labels

Excellnt User Friendly Operation
  • Scanning Area Marker

3 color Extra-bright LED

  • Easy to see scanner information
  • Vibrator Function
  • Scan completion confirmed with vibration
  • Adjustable Buzzer Volume
  • 3 levels of buzzer volume to suit the surrounding environment


Versatile Reading Functions
  •  
  • Read Multiple Codes Simultaneously
  • The GT10Q can read multiple codes within the reading area, such as continuous QR codes and multiple bar codes, in a single reading.
  • Barcode Reader
  • The GT10Q achieves high-speed reading equal to traditional linear readers
  • Drop Test Standard
  • High standard of impact resistance due to a new stronger body and a design which incorporates impact rubber for added protection.

Splash and Dust Proof to Meet IP54 Standards
Passes IEC International Standards Protection Class IP54(equivalent to JIS splash resistance). High level of protection for use in rugged environments.

One-touch Key Functions
Choice of scanning method for user use

Code Discrimination

By registering two types of readable symbologies in the GT10, the magic key can toggle to avoid reading the incorrect codes, while in multiple reading code mode

Power ON/OFF Control
Scanner is on stand by when magic key is OFF. Scanning beings when magic key is(switched) ON.

Transmitting Designated Characters
Data to be transmitted (i.e operation start codes) can be setup beforehand when the magic key is ON.

Retransmit Scanned Data
Scanned data can be retransmitted when the magic key is ON- so the bar code does not need to be repeatedly scanned.
Wide range of Functions

Code comparison
Determine if a bar code being read matches a master bar code registered in the GT10.

Remote ON/OFF Function
Scanning can be turned ON/OFF via commands from a host computer.

Auto-sensing function
The auto-sensing function automatically begins scanning when a label is detected.

Programmed Data Formatting
Easily configure the GT10 to automatically format scanner output to meet legacy system reguirements.
Type GT10Q-S
Model GT10Q-SR (RS-232C Type) GT10Q-SU(USB Type
Scanner Readable codes 2-dimensional codes QR Code, Micro QR Code, DataMatrix (ECC200), PDF417, MaxiCode, GS1 Databar Composite
Bar codes EAN-13/8 (JAN-13/8), UPC-A/E,UPC/EAN (With add-on codes), Interleaved 2 of 5, CODABAR (NW-7), CODE39, CODE93, CODE128, GS1-128, GS1 Databar
Resolution 2-dimensional codes 0.25mm
Bar codes 0.15mm
Image capture Loaded
Standard reading position 100mm
Marker Area guide marker
PCS value not less than 0.45
Skew Angle 360°
Angle ±35°
Reading confirmation 3-color LED (red, blue and green) buzzer (with volume control), vibrator
Communications Communication system RS-232C USB1.1compliant
Connector I/F Dsub-9S USB TypeA
Power Power supply original AC adapter Supplied from the connection target
Environment Requirements Drip-proof IP54
Shock Resistance 2 m (onto Concrete)
Temperature 0 to 50°C
Humidity 10 to 90%RH(without dews)
Illumination 20 - 10,000lx (Fluorescent lamp in daytime)
Weight (excl. cable) Approx. 210g