| PRINT METHOD | *Thermal Transfer/Direct Thermal *Harmonic(History Control Print Head) |
| DOT RESOLUTION | 300 dpi/ 11.8 dot per mm |
| PRINT SPEED | 1"- 8"/sec.(15mm - 200mm/sec.) |
| PRINT WIDTH | 4.25"/108mm |
| PRINT LENGTH | 51"/1300mm |
| MEMORY | *16MB SDRAM *4MB Flash memory(Up to 16MB as option) |
| MEDIA TYPE | *Die cut labels *Butt cut Labels tags *Tag stock *Roll stock(Continuous s/o die cuts) *Fan Fold |
| MEDIA WIDTH | *4.5"/116mm |
| MEDIA THICKNESS | *0.0025" to 0.01"/0.0635mm to 0.254mm |
| SUPPLY ROLL CAPACITY | *8"/210mm maximum diameter(6"/150mm max for I.Rewinder) |
| RIBBON ROLL CAPACITY | *3"/78mm maximum diameter |
| CABINET | *All steel cabinet |
| LCD DISPLAY | *2 lines by 8 characters(Alpha/Numeric) *Back Light |
| SENSORS | *Ribbon sensor (Reflective method) *Label sensor(Transmit method) *Media Home position sensor (Transmit-Auto calibration method) |
| ERROR INDICATORS | *Label/Ribbon empty *Head open *Communication *Grammatical *Parameter (Each error is notified by buzzer and LCD |
| BAR CODE | *Code39, Code93, Code128, NW7, 2 of 5(Industrial, Matrix and Interleaved), EAN-JAN 13/8, UPC-A/E, EAN128, QR Code,PDF417, Data Matrix, Maxi Code, RSS |
| FONTS-CHARACTER SIZE IN DOTS | *8 character sets(Alpha/Numeric and symbols)8x8, 12x12, 16x16, 16x24, 24x24, 24x26, 32x40, 48x60 Expansion is 1-10 and 16 times (Both directions) *5-OCRB character sets(4 Numeric and 1 Alpha/Numeric) Numeric-16x18, 24x27, 32x36 and 40x45 Alpha/Numeric-32x32 NOTE : Should not expand Scalable Smooth Fonts,32-720 Dot width, 32-720 Dot length Italic Slant Programmable 10, 15 and 20 degrees. NOTE : 8-31 Dots printing is available but must be matched properly with speed and media *Down loadable font |
| PRINTING MODES & FUNCTIONS | *Peel off, Tear off(demand type)with label back feed for top of label printing. *Batch printing(Stip-for continous printing of labels. Can be used with optional External Rewinder) *Butt cut label printing(Requires optional back side mark sensor) |
| PROGRAMMING LANGUAGE FEATURES | *Advanced Label marking language-ALL *ALL commmand are all ASCII characters. This allows flexibility with many environments and platforms *Easy to program and format printing areas *Pixel programming allows expanded area of up to 4 times Four direction print rotation(0,90,180 & 270 degrees) Reverse print and area fill in *Mirror print *Half Tones *Lines, dotted lines, angle lines and boxes Bit image data transfer and printing *Downloadable graphics, text, font and formats to optional memory card *Character Set(Code page)table *Serializing(Numeric) *Communication and print functions *RLE data compression *Graphic supported AIM, AIX, BMP, PCX(Monochrome only) |
| ADJUSTABLE PRINT FUNCTIONS SELECTABLE TROUGH FRONT PANEL OR BY SOFTWARE | *Print Speed/Energy Settings *Print Density *Label Print Position *Cutting Position *Thermal Transfer/Direct Thremal *Test Printing *Ready/Pause |
| COMMUNICATION INTERFACE-SELECTABLE THROUGHT FRONT PANELL OR BY SOFTWARE | *Parallel/USB(User select) *RS232/to 115,200 baud rate, Line Control-RS-CS, XON-XOFF, ER-DR, Stop Bits, Parity, Data length |
| POWER SOURECE | Multiple Power supply, Industrial standard, 115 volts +-10% AC50/60 HZ, 240 volts +-10% AC 50/60 HZ, Built to UL/CSA safety standard and FCC emissions standards. |
| ENVIRONMENTAL | *Operating temperature 41 to 104 fahrenheit /5 to 40 Centigrade *Relative humidity below 85% Non-condensing *Ventilation : Air Movement *Dust:Non-Conducting, Non-Corrosive |
| OPTIONS | *Cutter(Slide type) *Cutter(Non stop rotary type) *External Label Stocker *8MB Flash memory *LAN interface 100 Base-TX/10 Base-T(TCP/IP Protocol) |
| SOFTWARE | *BarTender Ultra Lite Plus *Windows Drivers |
| DIMENSIONS | *8.5"W x 12"H x 16"D(220mmW x 300mmH x 405mmD) |
| WEIGHT | *27.5lb/12.5kg |
(84-028) 38 684 410
sales@wincor.com.vn
Cart 
