|Chia sẻ :||
|- Decode speed and read range: Varies by model
- X-Mode Decoding Technology
- Optional USB Connectivity
MINI HAWK 3: 3 megapixel resolution imager
MINI HAWK HR: High resolution imager
MINI HAWK HS: High speed imager
MINI Hawk imagers pack aggressive direct part mark (DPM) reading algorithms into a miniature imager that is both powerful and easy to use for barcode and 2D track, trace and control applications. Aggressive decoding is ensured through X-Mode technology, which reads damaged or difﬁcult symbols with no conﬁguration or setup required.
With multiple resolutions and high speed conﬁgurations available, there is a MINI Hawk imager to solve virtually any challenging application.
Decode Any Symbol: The MINI Hawk consistently reads damaged, distorted or otherwise challenging direct part marks with our patented decode algorithms.
Autofocus: For real time dynamic autofocus, position the symbol at the center of the field of view, and push the EZ button. The MINI Hawk automatically adjusts focal distance and sets internal parameters to optimize the symbol.
Wide Field of View: Read symbols as large as 2” (50.8 mm) square as close as 1” (25.4 mm) with diffractive field illumination and optional right angle mirror.
X–Mode Technology: In addition to the most aggressive decoding available, X-Mode technology provides easy setup and deployment of the MINI Hawk in any application.
Compact and Lightweight: Miniature form factor fits easily in tight spaces, and is lightweight for mounting into robotic applications.
|Mechanical||Height: 1” (25.4 mm) Width: 1.80” (45.7 mm)
Depth: 2.10” (53.3 mm) Weight: 2 oz (57 g)
|Light Source||Type: High output LEDs|
|Light Collection Options||Progressive scan, square pixel. Software adjustable shutter speed, electronic shutter
MINI HAWK 3: 2048 by 1536 pixels (QXGA)
MINI HAWK HR: 1280 by 1024 pixels (SXGA)
MINI HAWK HS: 752 by 480 pixels (WVGA)
|Read Parameters||Pitch: ±30° Skew: ±30° Tilt: 360°
Decode Rate: Up to 60 decodes per second (HS model)
Focal Range: 1.3 to 9.3” (33 to 236 mm) (autofocus)
|Connector||Type: 3 ft. cable terminated with High Density 15-pin D-Sub socket connector or USB Type A connector|
|Communication Protocols||Standard Interface: RS-232, RS-422, or USB|
|Symbologies||All standard linear bar codes, GS1 Databar, PDF417, Micro PDF, 2D Symbologies|
• Dot peen mark on power-train components
• Laser marks on automotive electronics components
• Laser marks on components
• Laser markings on printed circuits boards, flex circuits
• Laser marks on packages and components