0913 898 909
Share to Facebook   Share to Twitter   Go to tvintec   Share to Twitter
Đầu đọc mã vạch 2D khong day Denso GT10Q-SB for US Đầu đọc mã vạch 2D khong day Denso GT10Q-SB for US
68/98 388 bài đánh giá
Trang chủ Máy quét mã vạch Máy quét đọc mã vạch Denso Đầu đọc mã vạch 2D khong day Denso GT10Q-SB for US

Đầu đọc mã vạch 2D khong day Denso GT10Q-SB for US

Đầu đọc mã vạch 2D khong day Denso GT10Q-SB for US

Mã sp: GT10Q-SBUS
Nhãn hiệu: Denso
Call
Chia sẻ :
Máy quét mã vạch 2d không dây Denso

  • GT10Q-SB for USBluetooth® wireless 2D code scanner
  • Connectable to a wide range of devices
  • Built-in Bluetooth ® wireless technology facilitates connection with a wide range of devices.
  • Improvement in workability with wireless connection
  • Because there are no cables, the GT10B can be installed anywhere (Min. 10m, with no obstractions).
  • Can be connected by simply scanning the bar code underneath the communication unit.ArrowBA10
  • 4 data-saving functions
  • Multiple units can be used simultaneously by specifying where to connect.
  • Transmission Confirmation (planned)
  • Accurate data transmission possible with ACK/NAK protocol built-in.
  • Error correction code included in the data helps prevent missing and substitution of the data.
  • Scan Lock
  • Prevents scanning in the event of disconnection.
  • Function to notify decline in battery voltage
  • Beeper and LED alarm function to warm of decline in battery voltage(planned).
  • An orange LED will flash at 200 mm second intervals and a beeper will sound 5 times.
  • Extended operating time
  • Eight hours of operating time possible even with a constant Bluetooth ®connection (at one scan per 5 seconds).
  • Rapid Recharging
  • Battery can be charged in approx. 2.5 hrs with the exclusive unit charger (CH-GT10N).
  • Superior scanning performance
  • Realizes rapid scanning of bother 2D and bar codes (twice the speed(1) of conventional units).
  • Improved scanning of poorly printed 2D code labels (Compared with other Denso models).
  • Divers scanning features
  • Target Pointer Mode
  • Enables pinpoint aiming and scanning, even with multiple codes in the scanning area.
  • Multiple Bar Code Scanning Mode
  • Instantly scans multiple bar codes at once.
  • Bar Code Reader Mode
  • Achieves high speed scanning equal to traditional innearscanners.
  • Single Scanning Mode
  • Realizes single scanning of QR code combinations.
  • World- leading impact resistance
  • With a stronger body and the use of impact-resistant rubber, the scanner can survive a 2 m drop-the highest standard in the world.
  • Superior environmental endurance
  • After many years of developing high quality technology, IEC International Standards Protection Class IP54 (equivalent to JIS spash resistance) has been achieved, preventing water and dust from infiltrating the scanner.
  • Superior handing
  • Area Marker
  • Laser illumination of scanning area and center of scannning area Tri-color Extra Bright LED
  • Tri-color Extra Bright LED
  • Tri-color LED display that shows operation status
  • Vibrator Function
  • Scan completion confirmed by vibration
  • Adjustable Beeper Volume
  • 3 levels of beeper volume to suit the surrounding environment
  • Wide range of Functions
  • Code comparisonDetermines if a code being scanned matches a master bar code redistered in the GT10Q.
  • Data Editing Function
  • Sorts scanned barcode data and prints out only necessary data.
  • Use of magic key
  • Wireless connection control
  • Wireless connection can be disconnected by pressing and holding the magic key for a few seconds. Reconnect by switching the trigger ON.
  • Marker swich control for easier pinpoint scanning
  • Code type switching
  • Two types of code can be pre-registered to enable easy swithing between the two types of code by turning the magic key ON.
  • Scanning ON/OFF feature
  • Turn the magic key OFF to suspend scanning, and ON to resume.
  • Transmission of designated characters
  • Data that is already stored (eg operations initiation code) can be sent by switching the magic key ON.
  • Retransmission of scanned data
  • Scanned data can be retransmitted when the magic key is ON so the bar code does not need to be repeatedly scanned.
  • Activating and ending Bar Code Reader Mode
  • Operation of a single magic key activates or ends Bar Code Reader Mode.
Đầu đọc mã vạch (máy quét mã vạch) Denso GT10Q-SB for US
 
Type GT10Q-SB
Scanner System Area scanning
Scanning Area (1) 59 mm x 44 mm
Scannable codes 2D codes QR Codes, Micro QR Codes, DataMatrix(ECC200), PDF417, Micro PDF, MaxiCode, GS1 Databar Composiite
Bar codes UPC-A/E, UPC/EAN(with add-on codes), Interleaved 2 of 5(ITF), CODE39, CODABAR(NW-7), CODE128, GS1-128, GS1 Databar
Resolution 2D codes 0.25mm
Bar codes 0.15 mm
Scanning Confirmation 3-color LED (red, blue and green),
Beeper (with volume control), vibrator
Image capture function Yes
Marker Area Maker
PCS Value 0.45 Min.
I/F Standard Bluetooth ® Ver1.1 Power class2
Profile Serial Port Profile (SPP)
Power Supply Main Battery Exclusive battery pack
Operating Hours Approx. 8 hours
Environmental Operating Temp. 0-50 °C(2)
Requirements Water-/Dust Proof IP54(Equivalent to JIS splash resistance)
  Shock Resistance(3) 2m (Concrete floor)
  Operating Humidity 10-90% RH(no condensation or frost)
  Operating ambient illumination 20-10,000 lux(Daylight florescent lighting)
Weight Approx 260g